Amer Networks SS2GR50I Przewodnik Instalacji Pobierz pdf (Strona 16)

Installation Guide

2-4

 Provide electromagnetic shielding if necessary.

2.1.1.6 Rack Configuration

The dimensions of the switch are designed to be mounted on a standard 19’’ rack, the

dimensions are 440mm x 44mm x 410mm (W x H x D). Please ensure good ventilation for

the rack.

 Every device in the rack will generate heat during operation, therefore vent and fans

must be provided for an enclosed rack, and devices should not be stacked closely.

 When mounting devices in an open rack, care should be taken to prevent the rack

frame from obstructing the switch ventilation openings. Be sure to check the

positioning of the switch after installation to avoid the aforementioned.

Caution

If a standard 19’’ rack is not available, the switch can be placed on a clean level desktop,

leave a clearance of 10mm around the switch for ventilation, and do not place anything on

top of the switch.

2.1.2 Installation Notice

 Read through the installation instruction carefully before operating on the system.

Make sure the installation materials and tools are prepared. And make sure the

installation site is well prepared.

 During the installation, users must use the brackets and screws provided in the

accessory kit. Users should use the proper tools to perform the installation. Users

should always wear antistatic uniform and ESD wrist straps. Users should use

standard cables and connecters.

 After the installation, users should clean the site. Before powering on the switch,

users should ensure the switch is well grounded. Users should maintain the switch

regularly to extend the lifespan of the switch.

2.1.3 Security Warnings

 When using SFP transceiver, do not stare directly at the fiber bore when the switch is

in operation. Otherwise the laser may hurt your eyes.

 Do not attempt to conduct the operations which can damage the switch or which can

cause physical injury.

 Do not install, move or disclose the switch and its modules when the switch is in

operation.

 Do not open the switch shell.

 Do not drop metals into the switch.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21

Brak uwag

Amer Networks SS2GR50I Przewodnik Instalacji Strona 16